Muratec F-300 - Manual (Page 93)

5-7 R
ECEIVING FAXES
1
2
3
4
5
7
8
9
10
11
12
13
14
A
6
R
ECEIVING
F
AXES
Paper save function:
•Half-page reception
Half-page reception can conserve paper if some of the faxes you receive are half-page,
“Memo-sized” messages. When activated, this feature tells the machine to combine two of
these half-page receptions onto a single sheet.
Half-page reception only combines half-page messages sent back-to-back during the
same transmission. It won’t combine two half-page faxes from separate transmissions.
•Duplex reception
Duplex reception can save paper by duplex printing received faxes.
When activated, this feature tells the machine to combine and print the received two
pages onto both sides of a single sheet. This feature is available only for the MFX-1330
with the optional duplex unit installed.
To adjust the print settings
Default setting:
Rx reduction rate: Auto, Reduction margin: 40 mm, Half-page reception: Off (Paper save:
Off).
1
Press [Menu], [2], [2], [0], [2], then [Enter]. The machine shows the current reduction
rate for fax reception:
Rx Reduc. Rate :Auto

/  /Enter
2
Press [ ] or [ ] to select the reduction rate.
3
Press [Enter] to save the setting.
The machine shows the current reduction margin:
Margin
(00-85): 40 mm
4
Use the numeric keys to enter the reduction margin you want.
5
Press [Enter] to save the setting.
The machine shows the current setting for half-page reception:
Half Page Recpt.:Off

/

/Enter
When the optional duplex unit is installed in MFX-1330, the machine shows the
current setting for the paper save function.
Paper Save:Off

/

/Enter
6
Press [ ] or [ ] to select the paper save function.
7
Press [Enter] to save the setting.
8
Press [Reset] to return to the standby mode.