Muratec F-300 - Manual (Page 143)

9-11 S
ECURITY FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
S
ECURITY
FEA
TURES
Sending a fax using a department code
For this operation to work, make sure:
• The department code should exist on your machine
• You know the department code
1
Place your document on the ADF or document glass.
(See page 2-11 for details.)
2
Adjust the document resolution and contrast.
3
Enter the fax number by either pressing a one-touch key, entering a speed-dial num-
ber or manually dialing it.
4
Press [Start]. (If you pressed a one-touch key, no need to press [Start].)
Enter Dept.Code
_
6
Use the numeric keys to enter the appropriate department code.
7
Press [Start].
NOTE: The document glass is available only for the MFX-1330.
Making a copy using a department code
For this operation to work, make sure:
• The department code should exist on your machine
• You know the department code
1
Place your document on the ADF or document glass and adjust settings.
2
Use the numeric keys to enter the number of copies.
4
Press [Start].
Enter Dept.Code
_
6
Use the numeric keys to enter the appropriate department code.
7
Press [Start].
NOTE: The document glass is available only for the MFX-1330 .