Muratec F-300 - Manual (Page 126)

8-2 S
PECIAL FEATURES
Soft keys
The soft key is a shortcut key. You can assign a function that you frequently use into a
soft key for instant recall from the control panel.
When the soft key function is activated the light above it will glow. However, according
to the function you assigned, the light above the soft key will be not used.
The default setting for soft keys differs between MFX-1330 and F-300.
MFX-1330 control panel
Soft key 1 Soft key 2 Soft key 3
Functions you can assign to a soft key
The following table lists the functions you can assign to the soft key.
Function name Descriptions
Light indi-
cation
Reference
page
Sort Copy Makes on /off setting for sort copying. on 7-5
Combine Makes on /off setting for combine copy. on 7-8
Zoom Use this to adjust a zoom ratio by 1% steps. on 7-4
Broadcast Use this to make a broadcasting. — 4-12
Address Entry Note 1 Use this to enter a e-mail address. — —
Report Makes on /off setting for print the transmit confir-
mation report.
on 11-5
Monitor Use this to obtain a dial tone for on-hook dialing. on —
Pause /Dial Opt. Use this to enter a dialing character. — 3-2
Delayed Use this to make a delayed transmission. — 4-13
Batch Tx Use this to store a document for batch transmis-
sion.
— 4-14
Select TTI Select the TTI to be sent. Also it can disable TTI
sending.
on 4-17
Select Line Note 2 Select telephone line when sending a fax. — —
Cover Page Makes on /off setting for cover page. on 4-20
Fax Forward Makes on /off setting for fax forward. on 5-12
Fax & Copy Makes on /off setting for Fax&Copy. on 4-19
Security Makes on /off setting for security reception. on 9-3
Separator page Makes on /off setting for separator page. on 5-14
Memory Tx Makes on /off setting for memory transmission. on 4-3
Auto Rx Makes on /off setting for automatic reception. on 5-2
F-code Tx Use this to make a F-code transmission. — 6-11
F-code Polling Use this to make a F-code polling. — 6-12
Polling Use this to make a polling reception. — 5-11