Muratec F-300 - Manual (Page 57)

3-5 A
UTODIALLER
& D
IALLING OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
A
UT
ODIALLER
& D
IALLING
OPTIONS
Quick one-touch registration
1
Make sure that the machine is in the fax standby mode.
Fax Ready
Nov 27 2004 2:15pm
2
Press an empty one-touch key you want to register. The machine will show:
01:Enter One-Touch
Yes  Enter
01:Enter One-Touch
No  Cancel
To cancel this operation, press [Cancel].
3
To store the one-touch number, press [Enter].
01:Fax Number
_
4
Use the numeric keys to enter the number as if performing a manual dial.
The number can hold up to 40 digits.
To change a number, press [ ] or [ ] to move the cursor and press [Cancel] to erase
the number. Then enter the correct number.
5
Press [Enter].
01:Name ;Upper
_
6
Use the numeric keys to name the one-touch key.
The name can hold up to 24 characters.
(Regarding how to enter the character, see “Entering character” on page 2-2.)
To change a name, press [ ] or [ ] to move the cursor and press [Cancel] to erase
the name. Then enter the name correctly.
7
Press [Enter] to save the setting.
The machine will return to the standby mode.
8
Use the one-touch key labels supplied with your machine to label the one-touch keys
for easy reference.
Erasing a one-touch number
1
Press [Menu], [1], [1], [2], then [Enter].
2
Press [ ] or [ ] to select a one-touch number.
You can also select a one-touch key by pressing that key.
3
Press [Enter] twice.
If you want to exit without erasing, press [Cancel].
4
To erase another one-touch number, repeat this procedure from step 2.
Otherwise, press [Reset] to return to the standby mode.