Muratec F-300 - Manual (Page 157)

11-3 R
EPORT
& L
ISTS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
R
EPORT
& L
ISTS
Name Description
Refer
page
F-Code Box List Lists each box’s identifier number, box name (if any), sub-
address, password, box type and each box’s settings.
To print this list, press [Menu], [5], [1], [1], [3], [Enter].
6-1 to
6-12
F-Code Doc. List Lists the each box’s identifier number, box name (if any),
box type and each file number (or document number) that is
stored.
To print this list, press [Menu], [5], [1], [1], [4], [Enter].
6-1 to
6-12
Batch Box List Lists each box’s identifier number, destination name, fax
number and day and time the transmission should start.
To print this list, press [Menu], [5], [1], [1], [5], [Enter].
4-14 to
4-16
Batch Doc. List Lists the documents’ file numbers.
To print this list, press [Menu], [5], [1], [1], [6], [Enter].
4-14 to
4-16
Fax Forward List List the each transfer rule’s identifier number, remote fax’s
number where you want documents to be transferred, on/off
setting, time period and auto print setting.
To print a program list, press [Menu], [5], [1], [1], [7], [Enter].
5-12 to
5-13
Macros List Lists the each key’s Macro key number and the name of the
job stored in the Macro key.
To print a program list, press [Menu], [5], [1], [1], [8], [Enter].
8-4
Scanner Settings List Lists the current scanner settings.
To print this list, press [Menu], [5], [1], [1], [9], [Enter].
*
Store Doc. List Prints how much memory each stored document is using.
To print this list, press [Menu], [5], [1], [2], [0], [Enter].
11-6
Tx confirmation report Prints after each document transmission. 11-5
* For details of scanner settings, refer to the PDF manual on the Printer & Scanner driver CD.