Muratec F-300 - Manual (Page 81)

4-17 S
ENDING FAXES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
S
ENDING
F
AXES
Selecting the TTI
The default setting is “Default”.
Every fax page you send arrives at the receiving machine with a single line of text at the
top of the page. This text lists your name, your fax number, date & time of transmission
and page number as below.
THE SLEREXE COMPANY LIMITED
SAPORS LANE - BOOLE - DORSET - BH25 8ER
TELEPHONE BOOLE (94513) 51617 - TELEX 123456
Your name Fax: +1-123-456-7890 Nov 27 2004 2:15pm P. 001/001
TTI information
Date and time
of transmission Page number Your fax number
You can select the name
either TTI 1, TTI 2 or TTI 3
You can select the three types of TTI (your name) stored in the “Specifying initial set-
tings” (pages 1-14 to 1-16) for each transmission. Also, you can tell the machine whether
or not to send the TTI information.
IMPORTANT: In some countries you are required by law to indicate your name and fax number on
every fax you send.
1
Press [Menu], [2], [2], [0], [8].
– or –
Press [Advanced Functions] until “Select TTI” appears on the LCD.
Select TTI

/

/Enter
2
Press [Enter].
TTI Default

/  /Enter
3
Press [ ] or [ ] to select one of following:
• “TTI Default” — The machine will send the “Usual TTI” you have set in “Usual
TTI selection” of “Specifying initial settings” on page 1-14.
• “TTI 1:(your entered name)” — The machine will send TTI 1.
• “TTI 2:(your entered name)” — The machine will send TTI 2.
• “TTI 3:(your entered name)” — The machine will send TTI 3.
• “TTI Off” — The TTI information will not be printed..
4
Press [Enter] to save the setting.
NOTE: If you assigned “Select TTI” to the soft key (page 8-2), you can select TTI by simply
pressing that key.