Muratec F-300 - Manual (Page 116)

7-4 C
OPYING
Basic copy settings
Selecting the document type
• Text — Select this when copying letters.
• Photo/Text — Select this when copying documents containing photographs or draw-
ings with letters.
• Photo — Select this when copying photographs or drawings.
To select the document type:
1
Press [Doc. Resolution].
2
Press [ ] or [ ] to select the document type.
Scanning the contrast
Setting the scanning contrast allows you to adjust the excessive light or darkness of the
document pages you are copying.
To change the contrast setting:
1
Press [Contrast].
2
Press [ ] to lighten, press [ ] to darken, or press [Contrast] repeatedly to select the
contrast.
To avoid confusing the Light and Dark settings, just remember — “Light lightens” and
“Dark darkens” — to keep it straight.
Zoom ratio
There are three ways to enter the zoom ratio.
NOTE: For enlarge copy, you can only use the document glass. The document glass is avail-
able only for the MFX-1330.
Using preset ratios
Press [ ] or [ ] to select the following preset ratio.
• 50%: Min.
• 64%: Letter (8.5"
× 11")  Half-letter (5.5" × 8.5")
• 78%: Legal (8.5" × 14")  Letter (8.5" × 11")
• 100%
• 129%: Half-letter (5.5"
× 8.5")  Letter (8.5" × 11")
• 200%: Max.