Inter-Tel CS-5400 - Manual (Page 106)

Hardware and Endpoints
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Page 88 IP Phone Flashing Light Indicators
FEATURE
2
The fea-
ture is in
use.
FWD
Calls are
being for-
warded.
HUNT
GROUP
All stations
in hunt
group are
unavail-
able. Hunt group
has a call
camped on.
IC
Intercom
call is in
progress. Recalling
intercom
call is
camped on
(waiting). Intercom call is
camped on
(waiting). An intercom
call is on hold
at the user’s
phone or the
user has
entered a
transfer fea-
ture code.
1
Mini-DSS 2
The pro-
grammed
endpoint in
busy or
unplugged. The pro-
grammed
phone is in
DND. The pro-
grammed
phone has a
call ringing
in. Continuous
flutter indi-
cates that
the pro-
grammed
phone was
left off-
hook.
MSG
Phone is in
alphanu-
meric
mode. Message is
waiting.
MUTE
Micro-
phone is
muted.
SPEAKER
Speaker-
phone is on
or ready for
use. Or,
endpoint
program-
ming is in
progress. Model 8600:
Intercom,
recall, con-
ference,
camped on,
or trans-
ferred call is
ringing-in.
SPEED
DIAL
2
Desig-
nated end-
point is
busy or
unplugged. Desig-
nated end-
point is in
DND. Designated
endpoint has
a call ring-
ing in. Continuous
flutter indi-
cates that
the desig-
nated
phone was
left off
hook.
Table 13. Flashing Light Indicators for IP and Multi-Protocol Phones(Continued)
BUTTON
STEADY
0 IPM
SLOW
30 IPM
MEDIUM
120 IPM
FAST
240 IPM
FLUTTER
60/960 IPM