Inter-Tel CS-5400 - Manual (Page 144)

System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Page 126 Administrator Feature Codes
Diagnostics On/Off 9900/9100 Enables or disables system diagnostics
mode to perform diagnostics functions such
as freezing/unfreezing the database, print-
ing message logs, and seizing a device for
troubleshooting purposes.
NOTE: Because diagnostics mode affects
system performance, it is recommended that
you run the diagnostics program when the
system is idle.
Enable Network Day 9862 Places any or all remote nodes into day
mode (you are prompted for the node num-
ber).
Enable Network Night 9861 Places any or all remote nodes into night
mode (you are prompted for the node num-
ber).
Modem Disable 9867 Disables the internal modem; used in con-
junction with the assigned extension num-
ber of the modem.
Modem Enable 9866 Enables the internal modem; used in con-
junction with the assigned extension num-
ber of the modem.
Modem Reset 9869 Resets the internal modem; used when the
modem fails to answer an incoming call or
to synchronize with an external modem.
CAUTION: Database corruption could occur
if the modem is reset during a database
programming session. Inter-Tel recom-
mends that you assign the modem exten-
sion to a Speed Dial button.
Night Ring On/Off 9860 Places system in night mode or cancels
night mode. While in night mode, the night
toll and trunk restriction lists are used.
Periodic Diagnostics
On/Off 9825 Periodic diagnostics extends and improves
the functionality and checks and reconcilia-
tions performed on various resources in the
system.
Program System Speed
Dial 9801 Programs system-wide Speed Dial numbers
when followed by location codes (000–999).
Set Network Date/Time 9810 Programs the time and date for all nodes in
the system. (Local time and date can also
be reset by individual nodes.)
Set Time/Date 9800 Programs system time and date
Table 20. Administrator Feature Code Definitions(Continued)
FEATURE NAME
CODE
(US/EUROPE)
DEFINITION