SATO MB200/201i - Manual (Page 24)

Setup
2-10
Using the optional AC Adapter for power
If your printer comes with the optional AC
adapter, the printer can be operated on AC
power instead of the supplied battery pack.
Follow the steps below:
1. Remove the cover of the
printer’s DC input jack
and connect the AC
adapter’s DC output
terminal to it.
2. Connect the AC adapter
to the wall outlet and turn
on the power. The
POWER lamp on the
adapter lights green.
Notes:
Be sure to turn the printer power off when removing
the DC output terminal of AC adapter or
disconnecting the power source. Otherwise, the
information stored in the printer may not be updated.
MB20xi A6.book Page 10 Friday, May 27, 2005 5:12 PM