SATO MB200/201i - Manual (Page 34)

Operation and Configuration
3-4
Printing via the IrDA Interface
Use the following procedure to print through
IrDA interface.
1. Place the printer 20 cm away from the IrDA port of
the computer or handy terminal. Adjust the printer
position so that the center of its IrDA filter projects
a 30° conical area which contains the IrDA
transceiver of the computer or handy terminal.
IrDA communication is limited to a 15 to 20 cm range.
The usable range may vary depending on the
usage environment, or the capabilities of other IrDA devices.
Communication is compromised by direct sunlight or
ambient light. In such a case, block the strong light from
entering the IrDA filter, or reduce the distance between the
two IrDA ports.
MB20xi A6.book Page 4 Friday, May 27, 2005 5:12 PM