SATO MB200/201i - Manual (Page 37)

Operation and Configuration
3-7
Optional LCD screen
The Wireless LAN version of the printer is factory-
fitted with a Liquid Crystal Display (LCD). The screen
can display the following information:
Battery strength: Three-segment indicator. When all
segments are lit, voltage level is greater than 8.0 V.
Two segments indicator a level of between 7.8 V and
7.9 V. One segment indicates a level of between 7.6 V
and 7.7 V. When all segments are off (voltage level
below 7.5 V, printing is not possible.)
Signal strength: Three-segment indicator to indicate
Minimum, Medium and Maximum signal quality. An X
indicates no reception.
Test Print indicator: Appears in Test Print mode.
ONLINE
QTY:0000
MANU
Signal
strength
Dispense Mode Manual/Auto status
Battery
strength
Two-line
text
display
T
Test Print mode
MB20xi A6.book Page 7 Friday, May 27, 2005 5:12 PM