SATO MB200/201i - Manual (Page 53)

Cleaning and Maintenance
5- 1
5
CLEANING AND
MAINTENANCE
By cleaning and maintaining the printer regularly, you
will prolong its durability and reliability, and also
reduce the inconvenience of unnecessary
malfunctions. Perform the following procedures
regularly after turning the printer OFF and removing
the battery pack.
Cleaning the Print Head
Slide the Cover Open/
Close lever to release the
cover. If the lever is not
accessible, first slide the
dispenser unit away by
lifting the top edge where
the arrow marks are
located. (see Step 1 of
“Installing the label roll” on
page 12).
Wipe off any dirt using a
cloth (soaked) in alcohol.
Never use thinner, benzene,
or kerosene.
MB20xi A6.book Page 1 Friday, May 27, 2005 5:12 PM