SATO MB200/201i - Manual (Page 48)

Operation and Configuration
3-18
Pitch Offset Use the <PO3>
programming
command. Takes effect
instantly; the
value is cleared
once the power is
turned off.
Dispense Offset Use the <PO1>
programming
command. Takes effect
instantly; the
value is cleared
once the power is
turned off.
Tear-Off Offset Use the <PO2>
programming
command. Takes effect
instantly; the
value is cleared
once the power is
turned off.
POSITION ADJUSTMENTS
MB20xi A6.book Page 18 Friday, May 27, 2005 5:12 PM