SATO MB200/201i - Manual (Page 54)

Cleaning and Maintenance
5-2
Cleaning the Platen and Peel Roller
Users can perform test prints to evaluate the print
quality and also diagnose problems.
Slide the Cover Open/
Close lever to release the
cover. If the lever is not
accessible, first slide the
dispenser unit away by lifting
the top edge where the arrow
marks are located. (see Step
1 of “Installing the label roll”
on page 12).
Wipe off any dirt using a
cloth (soaked) in alcohol.
Never use thinner, benzene,
or kerosene.
MB20xi A6.book Page 2 Friday, May 27, 2005 5:12 PM