Sun Microsystems FIRE V40Z - Manual (Page 147)

Appendix E IPMI Commands 125
IPMI Enable Channel Subcommand
Description: Allows you to enable one of two IPMI channels.
Format
Command format:
ipmi enable channel {sms | lan}
TABLE E-4 lists the arguments for this subcommand.
Return Codes
TABLE E-5 lists the return codes for this subcommand
TABLE E-4 Arguments for Subcommand ipmi enable channel
Arguments Description
sms The ID of the channel to enable for the System Interface; not case-sensitive.
lan The ID of the channel to enable for the LAN Interface; not case-sensitive.
If you are activating the LAN channel for the first time, you are prompted
for a password to associate with the null user.
TABLE E-5 Return Codes for Subcommand ipmi enable channel
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage, conflicting
options specified.
NWSE_InvalidArgument 4 One or more arguments were incorrect or invalid.
NWSE_NoPermission 6 Not authorized to perform this operation.
NWSE_ServiceNotAvailable 24 Requested service is not available.