Expressions – Sun Microsystems FIRE V40Z User Manual
Page 54
32
Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004
Expressions
lists the expressions and parameters available for IPMItool.
Note –
For each of these expressions, the beginning command is always ipmitool,
followed by the expression and parameter(s).
Note –
The sol command is not supported in these servers, but you can enable a
Serial-over-LAN feature. See
.
TABLE 2-2
Expressions and Parameters for IPMItool (1 of 4)
Expression
Parameter
Sub-parameter
Description and examples
help
Can be used to get command-line help on IPMItool
commands. It may also be placed at the end of commands
to get help on the use of options.
EXAMPLES:
ipmitool -I open help
Commands:
chassis, fru, lan, sdr, sel
ipmitool -I open chassis help
Chassis Commands:
status, power, identify,
policy, restart_cause
ipmitool -I open chassis power help
Chassis Power Commands: status, on, off, cycle,
reset, diag, soft
raw
netfn
cmd data
Allows you to execute raw IPMI commands (for example,
to query the POH counter with a raw command).
EXAMPLE:
ipmitool -I open raw 0x0 0x1
RAW REQ (netfn=0x0 cmd=0x1 data_len=0)
RAW RSP (3 bytes)
60 00 00