Sun Microsystems FIRE V40Z - Manual (Page 237)

Appendix H Service Processor Commands 215
SP Get SNMP Destinations Subcommand
Description: Displays the available SNMP destinations (IP address or host name) to
which the SP is configured to send. Many networking programs use this information
to identify the machine.
Format
Command format:
sp get snmp-destinations
Return Codes
TABLE H-80 lists the return codes for this subcommand.
NWSE_RPCConnRefused 12 RPC connection refused.
NWSE_UnknownError 15 Miscellaneous error not captured by other errors.
NWSE_FileError 18 File open, file missing, or a read or write error
occurred.
TABLE H-80 Return Codes for Subcommand sp get snmp-destinations
Return Code ID Description
NWSE_Success 0 Command successfully completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter usage, conflicting options
specified.
NWSE_RPCTimeout 2 Request was issued, but was not serviced by the server.
RPC procedure timed out and the request may or may
not have been serviced by the server.
NWSE_RPCNotConnected 3 Unable to connect to the RPC server.
NWSE_NoMemory 8 Insufficient memory.
NWSE_UnknownError 15 Miscellaneous error not captured by other errors.
NWSE_FileError 18 File open, file missing, or a read or write error occurred.
TABLE H-79 Return Codes for Subcommand sp delete snmp-destination
Return Code ID Description