Sun Microsystems FIRE V40Z - Manual (Page 223)

Appendix H Service Processor Commands 201
SP Mount Subcommands
The subcommands in TABLE H-57 manage the SP mount points.
SP Add Mount Subcommand
Description: Creates or resets a mount point.
Format
Command format:
sp add mount [{-l | --local} MOUNTPOINT ] {-r | --remote}
SERVER:FILESYSTEM
[{-u|--user} USER] [{-p|--password} PASSWORD]
TABLE H-58 lists the arguments for this subcommand.
TABLE H-57 SP Mount Subcommands
Subcommand Description
sp add mount Creates or resets a mount point.
sp delete mount Deletes the specified mount point.
sp get mounts Displays the current mount points on the SP.
TABLE H-58 Arguments for Subcommand sp add mount
Argument Description
{-l | --local} Optional; Specifies the local mount point. The only mount point
supported is /mnt.
{-r | --remote} Specifies the remote server and file system. If SERVER specifies a
host name, DNS must be properly configured.
{-u | --user} Specifies the user name for the mount. Only required for SMB.
{-p | --password} Specifies the password for the mount user. Only required for SMB.