Return codes – Sun Microsystems FIRE V40Z User Manual
Page 178
156
Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004
Return Codes
lists the arguments for this subcommand.
{-I | --noid}
Suppresses the display of the sensor ID column. By default, this
column always displays when more than one sensor is selected.
[-H | --noheader]
Suppresses the column headings.
{ -D | --delim }
Delimits columns with the specified delimiter. Headings are
also delimited unless suppressed. The delimiter can be any
character or string.
TABLE G-3
Return Codes for Subcommand sensor get
Return Code
ID
Description
NWSE_Success
0
Command successfully completed.
NWSE_InvalidUsage
1
Invalid usage: bad parameter usage, conflicting options
specified.
NWSE_RPCTimeout
2
Request was issued, but was not serviced by the server.
RPC procedure timed out and the request may or may
not have been serviced by the server.
NWSE_RPCNotConnected
3
Unable to connect to the RPC server.
NWSE_InvalidArgument
4
One or more arguments were incorrect or invalid.
NWSE_NotFound
5
Entity (user, service, file, path or other) was not found.
NWSE_NoPermission
6
Not authorized to perform this operation.
TABLE G-2
Arguments for Subcommand sensor get
Arguments
Description