Sun Microsystems FIRE V40Z - Manual (Page 98)

76 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004
Return Codes
Every subcommand returns one or more of the following return codes upon
completion. Refer to the following appendices in this user guide for each
subcommand and the corresponding return codes for that subcommand.
sensor Reports or sets the value of an environmental sensor or
control.
See
Appendix G , “Sensor Commands.”
sp Allows the authorized user to manage and monitor the SP
configurations, such as networking, external file system,
SNMP, SMTP, SSL, event logs and so on.
See
Appendix H , “Service Processor Commands.”
help Returns the following text:
Available Commands: platform, access, sp,
sensor, inventory, ipmi. Each of these
commands includes a help option (--help).
TABLE A-2 Return Codes (1 of 2)
Return Code ID Description
NWSE_Success 0 Command successfully
completed.
NWSE_InvalidUsage 1 Invalid usage: bad parameter
usage, conflicting options
specified.
NWSE_RPCTimeout 2 Request was issued, but was not
serviced by the server. RPC
procedure timed out and the
request may or may not have
been serviced by the server.
NWSE_RPCNotConnected 3 Unable to connect to the RPC
server.
NWSE_InvalidArgument 4 One or more arguments were
incorrect or invalid.
NWSE_NotFound 5 Entity (user, service, file, path,
etc.) was not found.
TABLE A-1 Server Management Commands
Command Description