Sun Microsystems FIRE V40Z - Manual (Page 96)

74 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004
Using the ssh Protocol
You must use ssh to execute these commands on the service processor (SP). There
are two ways to do this:
■ Use the interactive shell on the SP.
■ Preface each command with a set piece of text.
Interactive Shell on the SP
To use the interactive shell:
● Log into and authenticate on the interactive shell by running the command:
# ssh -l spipaddr spuser
Preface Text
● Preface each command with the following text:
# ssh -l spipaddr spuser