Function for conversion of video signals – Sony STR-DG1000 User Manual
Page 33
33
GB
G
e
tting Star
te
d
This receiver is equipped with a function for
converting video signals. You can output the
video signal after connecting this receiver via
the MONITOR OUT jack as shown in the
illustration.
• Video signals can be output as HDMI video,
component video and S video signals.
• S video signals can be output as HDMI
video, component video and video signals.
• Component video signals can be output as
HDMI video, S video and video signals.
In the video input/output conversion table of the receiver
a : Video signals are converted and output through the video converter.
f : The same type of signal as that of the input signal is output. Video signals are not converted.
X : Video signals are not output.
* Video signals are output when “VIDEO CONVERT” is set to “OFF” in the Video Settings menu.
Function for conversion of video
signals
Input Signals
Output Signals
B
C D
B
C D
A
B C D
HDMI OUT
COMPONENT VIDEO
MONITOR OUT
S VIDEO
MONITOR OUT
VIDEO
MONITOR OUT
HDMI IN 1/2 A
f
X
X
X
COMPONENT
VIDEO IN B
a
f
a
(Supports input signals
less than 480i.)
a
(Supports input signals
less than 480i.)
S VIDEO IN C
a
a
a/f*
a
VIDEO IN D
a
a
a
a/f*
INPUT jack
OUTPUT jack
continued