Using the sleep timer, Recording using the receiver, Using the sleep timer recording using the receiver – Sony STR-DG1000 User Manual
Page 96: E 96
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly.
Each time you press SLEEP, the display
changes cyclically as follows:
When Sleep Timer is being used, “SLEEP”
lights up on the display.
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be changed.
Recording using the
You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
You can record onto a MiniDisc or audio tape
using the receiver. See the operating
instructions supplied with your MD deck or
Press the input button of the
You can also use INPUT SELECTOR on
Prepare the playback
component for playing.
For example, insert a CD into the CD
Prepare the recording
Insert a blank MD or tape into the
recording deck and adjust the recording
Start recording on the
recording deck, then start
playback on the playback
Recording onto a MiniDisc or