On/off button (floor temperature, left & right) – Suburban Mfg REGAL INTENSIVE CARE UNIT 12019-01-NGFREP User Manual

Page 113

Advertising
background image

Form No. 702718 Rev. A March, 2005

101

Owner’s Manual - Regal Intensive Care Unit

On/Off Button

(Floor Temperature,

Left & Right)

P/N 212242

There are two on/off buttons on the electronics compartment door: one
each for left and right floor temperature. The buttons are identical and
are removed and installed the same way. (For main, alarm, oxygen,
cooling and heat on/off rocker switches, refer to Page 99.)

CAUTION: Before proceeding, make sure the unit is
Off, and the electric power cord un-plugged.

Tools and Supplies Required

„

Flat-blade screwdriver

„

Wire crimping tool

„

Small spade terminal (refer to text, Removal - Step 8)

„

Utility knife

Removal

1.

Make sure that the main on/off switch is Off and the
amber light in the switch is out.

2.

Unplug the power cord from the electrical outlet.

3.

Open the electronics compartment (refer to Page 57).

4.

Dis-connect the on/off button red wire from the side
terminal on the fuse holder (Figure 114).

Figure 114. Inside View of Floor Temperature On/Off Button and Related Components

On/Off Button

Fuse Holder

Rear of Temperature

Control Assy

Terminal

4

Terminal

6

System Light

Left Floor

Temperature

Units shown -

Right similar

Advertising