Chapter 3 - installation & setup, Unpacking and inspection, Parts included – Suburban Mfg REGAL INTENSIVE CARE UNIT 12019-01-NGFREP User Manual

Page 45

Advertising
background image

Form No. 702718 Rev. A March, 2005

33

Owner’s Manual - Regal Intensive Care Unit

Chapter 3 - Installation & Setup

Unpacking and
Inspection

CAUTION: The Regal Intensive Care Unit requires a
dedicated, 15-amp minimum source of electrical power.

CAUTION: Unpacking, installing and setting up the
Regal Intensive Care Unit is not difficult. The unit is
heavy, however, and we recommend that these
operations be done by at least two people.

If the shipping container appears damaged in any way, contact the
shipping company immediately. Save all damaged packing materials
to assist in proving liability for damage.

Carefully inspect your Regal Intensive Care Unit while you unpack it.
If damage is noted, or if parts appear to be missing, call the SSCI
Customer Service Department at 1-800-323-7366. For a list of
parts supplied with the unit, refer to Parts Included below.

The following parts are included in the shipment:
„

Regal Intensive Care Unit

„

Orange Removable PVC Floor (2)

„

Wire Grill Divider Panel

„

Clear Acrylic Divider Panel

„

Teledyne Oxygen Sensor (Fuel Cell)

„

Sodalime, 2.5 lb. Container (3)

Parts Included

WARNING: Oxygen is a highly combustible gas. Avoid the use of open flames,

smoking materials, or equipment capable of producing sparks in any area in

which oxygen is being used. Before servicing or performing maintenance on

this equipment, make sure the oxygen supply is turned off at the source.

Advertising