Suburban Mfg REGAL INTENSIVE CARE UNIT 12019-01-NGFREP - Manual (Page 95)

Form No. 702718 Rev. A March, 2005 83
Owner’s Manual - Regal Intensive Care Unit
Electric Power Cord
P/N 853431
2. Unplug the power cord from the electrical
wall outlet.
3. At the power cord connection on the unit,
twist the large connector plug counter-
clockwise and pull it off (Figure 93).
Installation
Note: Look at the three prongs in the connector
socket (Figure 94). Notice that two are curved,
and one is curved with an L-shaped tab on one
end. Notice also that there are matching slots on
the plug.
.
1. Align the prongs in the socket with the
matching slots on the connector plug.
2. Insert the plug, then twist it clockwise to
lock it (Figure 94).
3. Plug the other end of the power cord into
its wall outlet.
Figure 93. Electrical Connection at Rear
of Unit
Electric Power
Cord
(plugged in)
Figure 94. Electrical Connection Plug
and Socket
Socket Prongs Plug Slots
L-shaped
Prong
L-shaped
Slot
Removal
1. Make sure that the main on/off switch isOff and the amber
light in the switch is out.