Sony RM-NX7000 - Manual (Page 143)

143
Convenient oper
ations by pr
ogr
amming a
series of actions (macr
o) for a key/button
4
Press the [ON/OFF] tag.
5
Press a Timer program key whose
execution setting you want to set to
ON/OFF.
If you press a Timer program key that
appears normal (released), the key will
appear pressed and the execution setting
will be set to ON. If you press a Timer
program key that appears pressed, the key
will appear normal and the execution
setting will be set to OFF.
6
Press the [OK] key.
The execution of the Timer macro is set to ON/OFF, and the display returns
to step 3. When the execution of the Timer macro is set to ON, c (timer
mark) appears in the upper portion of the operation mode display.
z Tip
If you press the [EXIT] key, the setting will be canceled and the display returns to step
3.
To finish the setting
Press the COMMANDER OFF button for 2 seconds or longer. The display returns to
the Home display. The setting finishes.
When the execution of the Timer macro is set to ON
• Beforehand, connect the supplied AC power adaptor to the Remote
Commander so that the battery capacity is sufficient when the timer program
begins. If the battery capacity is insufficient at the time of operation, the timer
program cannot be executed.
• If the Remote Commander is not aimed at a component to be operated at the
time the timer program begins, the component may not operate even if a
signal is transmitted from the Remote Commander. When the execution of the
Timer macro is set to ON, select the [TEST] tag in the Program Edit display,
check the location of the Remote Commander and place it so that the
component operates properly.