Sony RM-NX7000 - Manual (Page 59)

59
Basic Oper
ations
3 Press the [LEARN] key.
4 Press the Component key
whose component display
includes the key you want
to teach.
For example, press the [TV] key.
5 Place the Remote Commander head to head with
the remote control of the component whose
signal is to be learned.
6 Press the function key or
button to which you want
to teach a signal.
For example, press the [TV POWER] key.
The Remote Commander is set to the
standby mode for receiving the remote
control signal.
Go to step 7 on page 61.
RM-NX7000
Remote control of
the AV component
About 5 - 10 cm
(2 - 4 inches)
Infrared detector
Continued