Sony RM-NX7000 - Manual (Page 57)

57
Basic Oper
ations
8 Press the [OK] key.
The display returns to step 3.
The setting for jumping to the first page
of the TV/DVD component by pressing
the MOTHER button is programmed.
z Tips
• If you press the [CANCEL] key, the macro will not be set and the display will
return to step 3.
• In this chapter, how to change the [Button1] label to the [MOTHER] label and
how to program a simple macro for jumping to the first page of the TV/DVD
component are explained. You can also set a series of actions. In step 6, before
pressing the [JUMP] key, program a series of actions. For details on
programming a series of actions, see “Step 2: Setting a macro” (page 120) in
“Programming a series of actions (macro) for a key/button.”
• You can set a macro to a Direct Access button also from the Home Edit display.
For details, see “3 When programming a macro for a Component key or a
Direct Access button” (page 119).
9 To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.