Sony RM-NX7000 - Manual (Page 221)

221
Remote Commander’
s Other Functions
If you do not want to change the system clock setting
In step 4, press the [OK] key without pressing
the [CLOCK SET] key. The setting in this
display will be complete, and the display will
return to step 3.
Or, in step 5, press the [CANCEL] key. The
setting in this display will be canceled, and the
display will return to step 4.
5 Set the year, month, day,
hour, and minutes by
pressing the [+]/[–] keys to
adjust the System clock.
z Tips
• Each time you press the [+]/[–] key, the
digit is advanced/reversed by one. If you
hold the [+]/[–] key pressed the digit is
advanced/reversed by two.
• The AM/PM indication changes every 12
hours.
6 Confirm the setting contents, and then press the
[OK] key.
The display returns to step 4.
7 Press the [OK] key.
The system clock is set, and the display
returns to step 3.
8 To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.