Sony RM-NX7000 - Manual (Page 144)

144
Continued
Macro operation using the Timer function
To check the setting of a Timer macro procedure
You can check the contents of a Timer macro procedure in the display.
1
Press the [SET] key for 2 seconds or longer in the Home display.
The Set display appears.
2
Press the [TIMER] key.
3
Press the [TIMER ON/OFF] key.
4
Press the [VIEWER] tag.
5
Press a Timer program key whose
macro you want to check.
The macro procedure is shown in the
display in order.
When a function key is programmed as a
step of macro, the key appears where the
key is assigned in the display. When a
function button is programmed, its name
appears in the center of the display.
When checking is complete, the display returns to step 5.
Note
The macro procedures of the [JUMP] key and the [DELAY] key are not displayed.