Sony RM-NX7000 - Manual (Page 16)

16
Using the touch panel display
Calibrating the touch panel display (ALIGNMENT)
1 Tap the center of the
marks sequentially with the
supplied Stylus.
We say “tap” about pressing lightly on
the display with the Stylus.
When you tap the center of the display,
calibration of the display is complete and
the Home display appears.
Note
When calibrating, tap correctly the center of
the
mark. If you do not tap the center, the
display in step 1 appears repeatedly until the
calibration is correctly performed.
z Tip
To calibrate the display again, see “Calibrating the touch panel display (ALIGNMENT)”
(page 212).
m
m