Sony RM-NX7000 - Manual (Page 206)

206
Reading a “Memory Stick” from the setting mode
When a “Memory Stick” is already inserted in the Remote Commander, you can
start the reading procedure from the Set display.
1
Press the [SET] key for 2 seconds or longer in the Home display.
The Set display appears.
2
Press the [SYSTEM] key.
3
Press the [MEMORY STICK] key.
4 Press the [READ] key.
For further operations, see steps 2 and 3 in
“Reading data saved in a “Memory Stick”
(READ)” (page 202).
5
Press the [OK] key in the confirmation display.
The display returns to step 4.
6
To finish all settings, press the COMMANDER OFF button for 2
seconds or longer.
The display returns to the Home display. Or press the [EXIT] key repeatedly
until the Home display is shown.
Reading data saved in a “Memory Stick” (READ)
Continued