Sony RM-NX7000 - Manual (Page 242)

242
Troubleshooting
Continued
Trouble with the move setting
Symptom
A beep sounds twice when you tap
the point where you want to move
the key to.
You cannot return the key to the
original position, or the key
alignment is incorrect, even if you
return it to the original position.
The setting contents (action) cannot
be executed, even if you move a key
from the Trash can page.
Remedy
• There is no space for locating a key on the place
where you want to move the function key to, or
the tapping point is not proper (page 91). Select
another place where the key can be moved to.
Tap the point of the center of the area where the
key is moved to.
• To perform the minor adjustment of the key
location when returning the moved key to the
original position, it is recommended to perform
the setting with “NAVITUS Design.”
When performing the setting with this Remote
Commander, tap the point of the center of the
area where the key is moved to.
• Once you move a key to the Trash can page, the
setting contents of the key except the Preset key
are deleted. When you return the key from the
trash can page, perform the setting again.