Sony RM-NX7000 - Manual (Page 54)

54
Continued
Using the Direct Access button (DIRECT ACCESS)
6 When the label setting is
complete, press the [OK]
key.
The label setting of the Direct Access
button is confirmed and the display
returns to step 3.
z Tip
If you press the [CANCEL] key, the label will
not be set and the display will return to step 3.
7 To finish all settings, press the COMMANDER OFF
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.