1 select p2: loop edit, 2 specify the start address in “start,” the loop s, 3 use the “loop on” check box to turn loop play3 b – KORG Speaker System User Manual

Page 86: The grid display, 2 set “grid” to the desired bpm tempo value, 3 set the end address so that it coincides with a, 4 to cancel the grid display, select the “grid” pa, Loop settings

Advertising
1 select p2: loop edit, 2 specify the start address in “start,” the loop s, 3 use the “loop on” check box to turn loop play3 b | The grid display, 2 set “grid” to the desired bpm tempo value, 3 set the end address so that it coincides with a, 4 to cancel the grid display, select the “grid” pa, Loop settings | KORG Speaker System User Manual | Page 86 / 144 1 select p2: loop edit, 2 specify the start address in “start,” the loop s, 3 use the “loop on” check box to turn loop play3 b | The grid display, 2 set “grid” to the desired bpm tempo value, 3 set the end address so that it coincides with a, 4 to cancel the grid display, select the “grid” pa, Loop settings | KORG Speaker System User Manual | Page 86 / 144
Advertising
See also other documents in the category KORG Acoustics: