Arpeggiator settings, Arpeggiator on/off, 1 in program p7: edit-arpeggiator, select the 1 ar – KORG Speaker System User Manual

Page 100: 2 in “arpeggiator tempo,” set the tempo, 3 in “pattern,” select the arpeggio pattern, Arpeggiator settings for a program, Ess the [enter] key, P.96), Efer to “arpeggiator settings, Arpeggiator settings for a pro- gram

Advertising
background image

96

Arpeggiator settings

This chapter describes the procedure for making
arpeggiator settings in each mode. For details on the
arpeggiator function, refer to “Using the arpeggiator
while you play” (

p.29).

Arpeggiator on/off

Each time you press the ARPEGGIATOR [ON/OFF]
key, the arpeggiator will be switched on or off. When
on, the LED will light. When you play the keyboard, an
arpeggio will play according to the selected arpeggio
pattern.

The on/off setting is stored when the program is
written.

Arpeggiator settings

1 In Program P7: Edit-Arpeggiator, select the

Arpeg.Setup tab.

2 In “Arpeggiator Tempo,” set the tempo.

You can also rotate the ARPEGGIATOR [TEMPO]
knob to adjust this. The LED will blink at the speci-
fied timing.

If “MIDI Clock” (Global P1: MIDI) setting is set to
External MIDI

or External PCI/F, this setting will be

displayed as “ =” EXT. This allows the tempo to
synchronize to an external MIDI device. In this case,
it is not possible to adjust the tempo on the TRI-
TON.

3 In “Pattern,” select the arpeggio pattern.

Select from preset arpeggio patterns P000–P004 and
user arpeggio patterns U000–231. You can use
numeric keys [0]–[9] to select user arpeggio patterns
U000–231

.

The way in which the pattern is played will depend
on settings such as “Octave” and “Sort.” P000–P004
in the following diagrams show how the arpeggio
will be played when “Octave” is set to 1, and “Sort”
is checked. P004: RANDOM is one possibility.

P000: UP

P001: DOWN

P002: ALT1

P003: ALT2

P004: RANDOM

U000(A/B)–U199 (A/B)
With the factory settings, various arpeggio patterns
are preset. These include a variety of patterns such
as drum or bass phrases, or guitar or keyboard
backing riffs.
Arpeggio pattern names are listed in the separate
Voice Name List.

U200–U215 (C)/U216–U231 (D)
With the factory settings, these do not contain pat-
terns.
If certain separately sold EXB-PCM series option
boards are installed and the included disk is loaded,

Arpeggiator settings for a pro-

gram

UP

DOWN

ALT1

ALT2

RANDOM

Advertising