KORG Speaker System - Manual (Page 136)

132
To use the Apple MIDI Driver , you must first
delete or move the Korg MIDI Driver if it exists in
your system folder. Then start up PatchBay, dou-
ble-click the Apple MIDI Driver icon that appears,
check Enabled for the Port to which the TRITON is
connected, set Interface Type to [1 MHz], and close
the dialog box. In PatchBay, drag the mouse from
the OutPort
of the MIDI application
(sequencer) to connect it to MIDI Out.
Using PC Exchange to convert SMF data
Most commercially available Standard MIDI File
(SMF) song data is saved in MS-DOS format.
You can use PC Exchange to make MS-DOS format
SMF song files recognizable by the Macintosh.
1 In the control panel, open PC Exchange.
The PC Exchange control panel will appear.
2 Press the [Add...] button.
The [Specify application associated with DOS exten-
sion] window will appear.
3 Input “.MID” into the DOS extension field.
In order to distinguish different types of file, MS-
DOS adds an extension consisting of a period and
three characters to the end of the filename. It is cus-
tomary for SMF data to have an extension of “.MID”
4 From the list that appears in the lower part of the
dialog box, select your SMF-compatible MIDI appli-
cation (sequencer).
The selected icon will appear in the Application
field.
5 From the [Document type] popup menu, choose
[Midi], and click the [OK] button.
The item which was added to the PC Exchange win-
dow will appear, and has now been registered.
Now when an MS-DOS SMF disk is inserted into
the disk drive, it can be used immediately.
For details refer to the documentation for “Macin-
tosh PC Exchange.”
Wiring diagram for special con-
nection cables
(2) AG-002B (for Macintosh)
Mini DIN 8-pin Mini DIN 8-pin
1
2
3
4
5
6
7
8 2
1
5
4
3
8
7
6
(1) AG-001B (for IBM PC or Compatible)
Mini DIN 8-pin D-SUB 9-pin
3
4
5
8
7
2
5
3