KORG Speaker System - Manual (Page 121)

117
Basic functions
sages to create changes in dynamics within the
musical data of the song. (
☞ p.31, 49 in the Parame-
ter Guide “Volume” - “MIDI)
By using the universal exclusive Master Volume mes-
sage, you can adjust the overall volume without
changing the volume balance between timbres or
tracks. (
☞ p.120 “About system exclusive messages”)
Controlling panpot (stereo position)
Panpot (CC#10) [Bn, 0A, vv]
(vv: value, where 00 is far left, 64 is center, and 127 is
far right)
When the above CC# is assigned to the ASSIGNABLE
PEDAL or as the B-mode function of a REALTIME
CONTROL knob [1]–[4], operating that controller will
transmit Panpot messages, and the panning will
change. When this message is received, the result will
be the same as when the controller is operated.
• When you set the “Pan” (P0: Mixer tab) in
Sequencer mode or Song Play mode, or when you
re-select the song or return to the beginning of the
measure in Sequencer mode, Panpot messages
(except for RND) will be transmitted by each track
whose “Status” is BTH, EXT, or EX2 (
☞ “Pan” -
“MIDI” on p.49 and 103 in the Parameter Guide).
Post insert effect panpot (CC#08)
[Bn, 08, vv]
(vv: value, where 00 is far left, 64 is center,
and 127 is far right)
When the above CC# is assigned to the ASSIGNABLE
PEDAL or as the B-mode function of a REALTIME
CONTROL knob [1]–[4], operating that controller will
transmit Post Insert Effect Panpot messages, and the
panning of the sound following the insert effect will
change. When this message is received, the result will
be the same as when the controller is operated.
• In Program mode and Sampling mode, this
message is transmitted/received on the global
MIDI channel. In Combination, Sequencer, and
Song Play modes, this message is transmitted/
received on the MIDI channel specified for each
insert effect.
• When you set “Pan (CC#8)” (P0: Insert Effect tab)
in Sequencer mode or Song Play mode, or when
you re-select the song or return to the beginning of
the measure in Sequencer mode, Post Insert Effect
Panpot messages will be transmitted by each track
whose “Status” is BTH, EXT, or EX2 (
☞ “Insert
Effect” - “MIDI” on p. 76 and 110 in the Parameter
Guide).
Effect control
Effect control 1 (CC#12) [Bn, 0C, vv]
Effect control 2 (CC#13) [Bn, 0D, vv]
When the above CC# is assigned to the ASSIGNABLE
PEDAL or as the B-mode function of a REALTIME
CONTROL knob [1]–[4], operating that controller will
transmit Effect Control 1/2 messages, and the specified
dynamic modulation will be controlled. When this
message is received, the result will be the same as
when the controller is operated.
Although various types of control change can be
selected as dynamic modulation sources, Effect Con-
trol 1 (CC#12) and 2 (CC#13) are dedicated for
dynamic modulation.
Effect 1 depth (Send 2) (CC#91) [Bn, 5B, vv]
Effect 3 depth (Send 1) (CC#93) [Bn, 5D, vv]
When the above CC# is assigned to the ASSIGNABLE
PEDAL or as the B-mode function of a REALTIME
CONTROL knob [1]–[4], operating that controller will
transmit Effect 1 Depth (Send 2) or Effect 3 Depth
(Send 1) messages, and the send level 1 or 2 to the mas-
ter effects MFX1 or MFX2 will be controlled respec-
tively. When this message is received, the result will be
the same as when the controller is operated.
On the corresponding MIDI channels, this will simul-
taneously control the timbre/track setting as well as
the setting following the insertion effect.
• In Combination, Sequencer, and Song Play modes,
the actual send level of the timbre/track is
determined by multiplying this value with the
send 1/2 settings for each oscillator (Program P8:
Routing tab). (
☞ “Send 1, 2” - “MIDI” on p.25, 26,
42, 75, and 110 in the Parameter Guide.)
• When you adjust “Send 1” or “Send 2” (P8:
Routing tab, Insert Effect tab) in Sequencer mode
or Song Play mode, or when you re-select a song or
return to the beginning of the measure in
Sequencer mode, Send 1/2 will be transmitted by
each track whose “Status” is BTH, EXT, or EX2.
(
☞ “Send 1, 2,” “Insert FX” - “MIDI” on p.76 and
110 in the Parameter Guide).
Effect 2 depth (IFX1–5 on/off) (CC#92) [Bn, 5C, vv]
Effect 4 depth (MFX1 on/off) (CC#94) [Bn, 5E, vv]
Effect 5 depth (MFX2 on/off) (CC#95) [Bn, 5F, vv]
Separately from the effect on/off settings in each
mode, Global P1: Basic Setup “Effect Global SW”
allows you to turn off insert effects IFX1–5 and master
effects MFX1 and MFX2. If you check “IFX1–5 Off,”
“MFX1 Off” or “MFX2 Off,” the corresponding mes-
sage will be transmitted with vv=0 [00]. If you uncheck
these settings, the corresponding message will be
transmitted with vv=127 [7F]. If you check these set-
tings, the corresponding effect(s) will be turned off as a
group. If you uncheck these settings, the on/off set-
tings of each mode will be used. The same applies to
reception. (vv of 00 is off, and 01 or greater is the origi-
nal setting.) These messages are transmitted/received
on the global MIDI channel. (
☞ “ON/OFF” - “MIDI”
on p.26 and 27 in the Parameter Guide.)
These messages are defined simply for use in
adjusting the effect levels, and may not have the
same function on another instrument connected to
the TRITON.
Using various controllers for control
Foot controller (CC#04) [Bn, 04, vv]
If the above CC# is assigned as the ASSIGNABLE
PEDAL function, this message will be transmitted
when the controller is operated.
MIDI applications