KORG Speaker System - Manual (Page 22)

18
Listening to a demo song
Here’s how to listen to a demo song on the TRITON.
Contents of the disks
The TRITON series comes with two floppy disks
(TNFD-00P and TNFD-01P).
PRELOAD.PCG
• Preloaded data (programs, combinations, drum
kits, arpeggio patterns, global settings)
• Program data (programs using the sampling
function) used by the demonstration songs
When you load PRELOAD.PCG, it will be written
into internal memory. This data is preserved even
if the power is turned off.
When you load PRELOAD.PCG, the data that had
been written before loading this data will be
rewritten. If you wish to keep this data, you must
first save it on a floppy disk before loading PRE-
LOAD.PCG (
☞ p.40).
PRELOAD.SNG
• Demonstration song and demonstration cue list
data
When you load PRELOAD.SNG, it will be written
into internal sequencer memory. This memory is
volatile, and the data will be lost when the power
is turned off.
When you load PRELOAD.SNG, the data that had
been written before loading this data will be
rewritten. If you wish to keep this data, you must
first save it on a floppy disk before loading PRE-
LOAD.SNG. (
☞ p.40)
PRELOAD.KSC
• Sample program data used by the demonstration
songs
When you load PRELOAD.KSC, its multisample/
sample data will be written into the TRITON’s
multisample/sample memory. This memory is
volatile, and the data will be lost when the power
is turned off.
Whether or not previously-written data will be
erased when you load PRELOAD.KSC is deter-
mined by the “Select .KSC Allocation” setting.
Refer to step 7 of the following procedure.
1 Insert the included “TNFD-00P” floppy disk into
the disk drive.
For details on handling a floppy disk and inserting
it into the disk drive, refer to “Disk mode”
☞ p.95.
2 Press the [DISK] key (the LED will
light).
You will enter Disk mode.
3 Press the Load tab.
The Load window will appear, and file information
will be displayed.
4 Press “PRELOAD.SNG.”
The display will be highlighted. This is the demo
song data.
5 Press the page menu command button.
The page menu commands will be displayed.
6 Press “Load selected.”
A dialog box will appear.
7 Press the check boxes to add a check mark.
Check “Load PRELOAD.PCG too.” When the data
is loaded, the .PCG file will be loaded along with
the .SNG file.
Check “Load PRELOAD.KSC too.” When the data
is loaded, the .KSC file will be loaded along with the
.SNG file.
1. Loading the demo song data
in Disk mode
3
5
4