KORG Speaker System - Manual (Page 128)

124
Song Play mode
• In Song Play mode, the TRITON can playback SMF
data directly from a disk or external SCSI device (if
the separately sold EXB-SCSI option is installed);
i.e., the data will be played back as it is being read,
and does not need to be loaded into memory.
• If the SMF data contains a GM System On message,
the TRITON will be initialized for GM playback
(
☞ p.102 in the Parameter Guide “GM Initialize”).
Sequencer mode
In Disk mode when you convert a song into a Standard
MIDI File and save it, you can choose either format 0
or format 1
.
• If TRITON song data that was saved as a format 1
SMF file is loaded into another device, the track
configuration may be different than it was before
being saved. This is because tracks that contain no
musical data are omitted, and the remaining tracks
are moved into the unused tracks. This will not
affect the playback itself.
• If song data that was saved by another device as a
format 1 SMF file is loaded into the TRITON, the
track configuration may be different than it was
before being saved. This is because tracks that
contain no musical data are omitted, and the
remaining tracks are moved into the unused tracks.
This will not affect the playback itself.
When exchanging sequence data between two TRI-
TON series instruments, we recommend that you save
the sequence data in the TRITON’s native format
(“Save SEQ”).
When sequence data is saved in the TRITON’s native
format, all of the settings and patterns unique to the
TRITON will be saved, which will ensure a higher
level of reproducibility than when the data is saved as
a Standard MIDI File (“Save to Std MIDI File”).