Pattern – KORG M3 User Manual
Page 104
Creating songs (Sequencer mode)
96
Shift/Erase Note:
This command shifts (moves) or
erases the specified note numbers in a specified MIDI
track and range of measures. For details, please see
“Shift/Erase Note” on page 286 of the Parameter
Guide.
Modify Velocity:
This command modifies the velocity
values of notes in the specified area so that they will
change over time according to a selected curve. For
details, please see “Modify Velocity” on page 287 of the
Parameter Guide.
Pattern
Step Recording (Loop Type):
Here you can perform
step recording into a pattern. For details, please see
“Step Recording (Loop Type)” on page 289 of the
Parameter Guide.
Event Edit:
Here you can edit individual events of the
musical data in a pattern. For details, please see “Event
Edit” on page 289 of the Parameter Guide.
Pattern Parameter:
This command specifies the
number of measures and the time signature of the
selected pattern. For details, please see “Pattern
Parameter” on page 289 of the Parameter Guide.
Erase Pattern:
This command erases the data from the
selected pattern. For details, please see “Erase Pattern”
on page 290 of the Parameter Guide.
Copy Pattern:
This command copies the settings and
musical data of the selected pattern to another pattern.
For details, please see “Copy Pattern” on page 290 of
the Parameter Guide.
Bounce Pattern:
This command combines the musical
data of the bounce source pattern and bounce
destination pattern, and places the combined musical
data in the bounce destination. For details, please see
“Bounce Pattern” on page 290 of the Parameter Guide.
Get From Track:
This command takes musical data
from a MIDI track and loads it into the specified
pattern. For details, please see “Get From Track” on
page 290 of the Parameter Guide.
Put To Track:
This command places a pattern into a
MIDI track. For details, please see “Put To Track” on
page 290 of the Parameter Guide.
Copy To Track:
This command copies the specified
area of musical data from the specified pattern to a
MIDI track as musical data. For details, please see
“Copy To Track” on page 291 of the Parameter Guide.
Convert to Drum Trk Pattern:
Converts the specified
pattern to a user Drum Track pattern. For details,
please see “Convert to Drum Trk Pattern” on page 291
of the Parameter Guide.
Load Drum Track Pattern:
Loads the specified user
Drum Track pattern into a user pattern. For details,
please see “Load Drum Track Pattern” on page 292 of
the Parameter Guide.