KORG M3 - Manual (Page 42)

Setup
34
Other USB devices may require a separate power
source, in addition to the USB connection; in this case,
you’ll need to use an appropriate power adaptor for
the device.
There is a limitation to the total current supplied to all
connected USB devices, as defined by the USB
specification. If the total current consumption of the
connected devices exceeds this limit, the M3 may not
correctly recognize the connected USB devices. If this
happens, an error message of “USB Hub Power
Exceeded!” will appear.
To avoid this problem, if you connect more than one
USB device, please use a self-powered USB hub in self-
powered mode. For details on connections and settings
for your hub, please refer to its documentation.
For details on the electrical current used by a specific
USB device, refer to its owner’s manual.
Installing the software
About the software
The most recent versions of the applications contained
in the included CD-ROM can be downloaded from the
Korg website (http://www.korg.com).
Please note before use
Copyright to all software included in this product is
the property of Korg Inc.
The license agreement for this software is provided
separately. You must read this license agreement before
you install this software. Your installation of this
software will be taken to indicate your acceptance of
this agreement.
Operating requirements
KORG USB-MIDI driver
Windows
Operating system: Microsoft Windows XP Home
Edition/Professional/x64 Edition Service Pack 2 or
later (the MIDI driver for the x64 Edition is a Beta
version)
All editions of Microsoft Windows Vista (the MIDI
driver for the 64-bit Edition is a Beta version)
Computer: USB port required (a USB host controller
made by Intel is recommended)
Macintosh
Operating system: Mac OS X 10.3.9 or later
Computer: USB port required
M3 Editor (stand-alone version)
M3 Plug-in Editor (plug-in version)
KORG FireWire Audio/MIDI driver
Windows
Operating system: Microsoft Windows XP Home
Edition/Professional Service Pack 2 or later
Computer:
CPU Pentium III/1 GHz or better (Pentium IV/2
GHz or better recommended)
Memory 512 MB or more (1 GB or more is
recommended)
Monitor 1,024 × 768, 16-bit color or better
If using the optional EXB-FW
A computer with a FireWire (IEEE 1394) port
If using USB B
A computer with a USB port
Formats supported by the M3 Plug-In Editor: VST,
RTAS