KORG M3 User Manual
Page 192
Using KARMA
184
Synchronization via MIDI realtime com-
mands
Enable Start/Stop Out in Prog/Combi
You can set up M3 so that starting and stopping
KARMA in Program and Combination modes will also
control start and stop on external MIDI devices, such
as sequencers and drum/groove machines (such as the
KORG Electribe series).
To do so:
1. Go to the Global MIDI page.
2. Under MIDI Routing Setup, turn on “Enable Start/
Stop Out in Prog/Combi.”
• In Program and Combination modes, playing a
note-on from the keyboard or pads to trigger the
GE selected for a KARMA module will also cause
the MIDI system realtime message “Start” to be
sent at the trigger timing.
• After the Start message has been sent, turning off
KARMA ON/OFF will send the MIDI system
realtime “Stop” command.