KORG M3 - Manual (Page 43)

Connections Installing the software
35
Quick Start
Introduction
Setup
Program
Combination
Sequencer
Sampling
Global
Media
Effect
KARMA
Drum Track
Other
Appendices
Macintosh
Operating system: Mac OS X 10.4 or later
Computer:
* M3 Plug-In Editor must also satisfy the operating
requirements of the host application.
You cannot run multiple instances of the M3
Editor and M3 Plug-In Editor on the operating
system. This means that you can’t use this editor to
edit two or more M3 units simultaneously.
Installing the driver and the editor
software in Windows XP
Note: In order to install or uninstall software in
Windows XP, you must have Administrator privileges.
Consult your system administrator for details.
Note: Before you connect the M3 to your computer via
USB, you must use the M3 application installer to
install KORG USB-MIDI Driver Tools.
Note: Before you connect the M3 (with the optional
EXB-FW) to your computer via FireWire, you must use
the M3 application installer to install the KORG
FireWire Audio/MIDI Driver.
Installing the M3 application
The M3 application installer will install the KORG
USB-MIDI Driver Tools and the M3 Editor/Plug-In
Editor automatically.
1. Insert the included CD-ROM into your CD-ROM
drive.
Normally the “M3 Application Installer” will start up
automatically.
If your computer is set so the installer does not run
automatically, double-click “KorgSetup.exe” on the
CD-ROM.
2. Follow the on-screen instructions to install the
desired software such as the KORG USB-MIDI
Driver Tools and M3 Editor/Plug-In Editor.
Note: If you intend to use the M3 Editor/Plug-In Editor
via the USB port, you must install the KORG USB-
MIDI Driver Tools.
Note: If you intend to use the M3 Editor/Plug-In Editor
via the FireWire port, you must install the KORG
FireWire Audio/MIDI Driver Tools.
3. When you’ve installed all of the selected software,
exit the installer.
4. If necessary, install the KORG USB-MIDI driver.
For details on installation, please see “Installing the
KORG USB-MIDI driver,” below.
Installing the KORG USB-MIDI driver
If you intend to use the M3 Editor/Plug-In Editor via
the USB port, you must install the “KORG USB-MIDI
driver” in your computer.
Use the KORG USB-MIDI Driver Tools to install the
KORG USB-MIDI driver.
1. Before you continue, you must first finish
installing the KORG USB-MIDI Driver Tools in
your computer.
2. Use a USB cable to connect your computer’s USB
port to the M3’s USB B connector. Then power-on
the M3.
When your computer first detects that the M3 is
connected, the Windows default driver will be
installed automatically. (This is not the KORG USB-
MIDI driver.)
Note: The driver must be installed separately for each
USB port. If you connect the M3 to a USB port other
than the one for which you installed the KORG USB-
MIDI driver, you’ll need to install the KORG USB-
MIDI driver again using the same procedure.
3. From the taskbar, click [Start]
→[All
Programs] →[KORG]→[KORG USB-MIDI Driver
Tools] →[Install KORG USB-MIDI device].
The setup utility will start.
4. Follow the on-screen instructions to install the
KORG USB-MIDI driver.
If during the installation, a dialog box regarding digital
signatures appears with a message saying “.... has not
passed Windows logo testing,” simply click [Continue]
to proceed.
Note: If you are unable to proceed with the installation,
it may be that your computer has been set to prohibit
installation of unsigned drivers. Check the settings of
your computer as described in “Allowing installation
of drivers that are not digitally signed.”
5. After you’ve installed the KORG USB-MIDI
driver, exit the installer.
If you are asked whether you want to restart, choose
[Yes] to restart your computer.
For more about installation, setup, or uninstallation of
the KORG USB-MIDI driver, refer to the installation
manual (HTML).
To view the manual, choose [Start] →[All
Programs]
→[KORG]→[KORG USB-MIDI Driver
Tools] →[Installation Manual].
About the M3 and USB-MIDI driver ports
KEYBOARD port
Applications on your computer use this port to receive
MIDI messages from the M3 (data from the keyboard
and controllers).
SOUND port
Applications on your computer use this port to send
MIDI messages to the M3’s internal sound generator,
making it produce sound.
CPU PowerPC G4 800 MHz or better (PowerPC
G5 or Intel Core Duo processor is
recommended)
Memory 512 MB or more (1 GB or more is
recommended)
Monitor 1,024 × 768, 32,000 colors or better
If using the optional EXB-FW
A computer with a FireWire (IEEE 1394) port
If using USB B
A computer with a USB port
Formats supported by the M3 Plug-In Editor: VST,
Audio Unit, RTAS