Kyocera FS-6700 - Manual (Page 100)

2-31
Chapter 2 Operating the Laser Printer
2.9. KIR Level
This printer incorporates the KIR (Kyocera Image Refinement) smoothing function. KIR
provides high quality printing by providing a software-type improvement to the resolution.
Print a status page to find out the current printing mode.
Notes
● Set the print density to 03 when setting the KIR mode. For details on print density, see page
2-37.
● You can look at the check line, the last line on a KIR test page, to make the optimum KIR
mode setting. Refer to the table on the next page.
The KIR setting is Off
The KIR setting is On
(Default setting)