Kyocera FS-6700 - Manual (Page 58)

1-33
Chapter 1 Installing the Page Printer
6. Load the paper.
7. Press the MODE key and then the + (output select) key or – (paper feed select) key several
times to display MP tray mode> .
8. Set the mode. For the procedure for setting each mode, see the settings for each mode given
below.
9. Press the key to display >MP tray size , then by pressing the ENTER key, the size of the
paper that will be fed from the multi-purpose tray will be set for a list of paper sizes which can
be set, see page B-3. For a depiction of the menu display hierarchy, see the menu hierarchy
given at the end of this manual.
Notes
● When legal size paper is to be fed from the multi-purpose tray, set to the manual mode (see
page 1-35), and print out one sheet at a time.
● Paper jams or improper printing may occur if the paper size setting and multi-purpose tray size
setting do not match. In addition, it is necessary to select either vertical feed (A4, Letter) or
horizontal feed (A4-R, Letter-R) from the control panel when using A4 size or letter size paper.
The following pages explain the use of the multi-purpose tray in the First Mode, Casette Mode, and
Manual Mode.
Paper Limit Indicator