Kyocera FS-6700 - Manual (Page 95)

2-26
2.6. Reduction (Page Set)
Make settings on the page set menu to print at a reduced size. This menu is used to set the
source paper size and the paper size to use after reduction. These settings can be made from
within programs or files using the PRESCRIBE SPSZ command.
Notes
● Printed results when making reductions differ from equivalent size printing.
Sometimes the line width of characters may not be consistent or lines may appear in
figures or image patterns.
● Landscape feeding while making reductions is possible from the multi-purpose tray in
first mode.
Bring up the page set menu. The following display will appear.
Page set
[CS]
→
[CS]
Source size indicator This is the paper size before reduction.
This must be the same as the paper size set for print data from the computer.
Target size indicator This is the paper size after reduction.
This must be the same as the paper size set for the feed cassette.
It is possible to set the following paper sizes (envelope) when using the PRESCRIBE SPSZ
command. The message display will show the messages given in the following table. For details
on the SPSZ command, see Chapter 6.
Target size indicator
Source size indicator
2.6. Reduction (Page Set)