Kyocera FS-6700 User Manual
Page 64
1-39
Chapter 1 Installing the Page Printer
3. Switch printer power on. The printer reads the contents of the memory card during its power-up
sequence. The information (nonresident fonts, etc.) on the memory card is now available for
use.
If the memory card information is deleted from the printer’s memory during the printing process, it
can be reread by using the mode selection function explained on the last page in this manual.
To remove the memory card:
1. Switch the power off.
2. Remove the memory card from the slot.
Handling Memory Cards
Memory cards contain sensitive electronic circuits. Treat them with appropriate care.
●
Memory cards are sensitive to electrostatic discharge. Please discharge yourself before
touching a memory card.
●
Never attempt to force a memory card into its slot.
●
Never bend a memory card.
●
Avoid impact. Do not drop a memory card.
●
Do not touch the terminals of the memory card.
●
Do not spill water or other liquids on a memory card.
●
Keep memory cards away from naked flames and other sources of heat.
●
Do not leave memory cards lying in direct sunlight.
For details regarding the use of the memory card, refer to Section 2.14. in this manual.